ad595 pdf
 |
授权形式： |
|
作者/开发商： |
|
| 文件大小： |
未知 |
解压密码： |
|
| 软件语言： |
|
更新时间： |
2008-06-08 |
| 版本号： |
|
软件平台： |
|
| 软件类别： |
|
演示地址： |
|
| 评分等级： |
★★★☆☆ |
注册地址： |
|
| 发布人： |
cjb |
下载次数： |
3（今日：2，本周：2，本月：2） |
| 插件认证： |
|
浏览次数： |
13 |
ad595 pdf:
The AD594/AD595 is a complete instrumentation amplifier and
thermocouple cold junction compensator on a monolithic chip.
It combines an ice point reference with a precalibrated amplifier
to produce a high level (10 mV/°C) output directly from a ther-
mocouple signal. Pin-strapping options allow it to be used as a
linear amplifier-compensator or as a switched output setpoint
controller using either fixed or remote setpoint control. It can
be used to amplify its compensation voltage directly, thereby
converting it to a stand-alone Celsius transducer with a low
impedance voltage output.
The AD594/AD595 includes a thermocouple failure alarm that
indicates if one or both thermocouple leads become open. The
alarm output has a flexible format which includes TTL drive
capability.
The AD594/AD595 can be powered from a single ended supply
(including +5 V) and by including a negative supply, tempera-
tures below 0°C can be measured. To minimize self-heating, an
unloaded AD594/AD595 will typically operate with a total sup-
ply current 160 µA, but is also capable of delivering in excess of
±5 mA to a load.
|
